China Electric Portable Wound Drainage Vacuum Suction Pump with Best Sales

Merchandise Description

Electric powered Transportable Wound Drainage Vacuum Suction Pump
 

ANGELBISS Revolutionary Immediate Plug-in Bottle Program & Double anti-overflow protection program. 

Features
 

one. Powerful suction up to .07Mpa

two. Double anti-overflow protection method

3. Immediate Plug-in Bottle Technique, only 1 press to take out bottle

four. 1400ml ability suction bottle

5. Modern filter engineering which helps prevent penetration of micro organisms and secretion into the gadget

six. Only 1 inlet for suction hose, keep away from deceptive of air inlet and outlet

seven. Straightforward clean & sterilize & person-helpful operations

eight. 18L air flow possibilities

Physique Composition Graphic

Accessories 

one Silicone suction hose Ø6mm, L=1.30m
1 Common Laptop electricity wire wires
one filter
1 Suction catheter (totally free)

Complex Requirements
 

Method Map Functions AVERLAST 18
Pump Driving System Max. Air Circulation 18L/min
Max. Vacuum Force .07Mpa
Operate Method Intermittent Run
Bottle System Max. Jar ability 1400ml
Overflow Security Double Safety Safety
Innovative Filter Water-resistant Reusable
Inlet Cover 1 only, and no want outlet
Operate Program Vacuum Gauge Assortment .00Mpa ~ .1Mpa
(0psi ~14psi)
Vacuum Manage Selection .02Mpa ~ .07Mpa
Suction Hose Cling Groove One particular, at the remaining
Wall mounted Cling Idea Two, at the back
Concealed Rotatable Take care of Indeed, at the best
3 Protection Method Floating approach Initial amount stop overflow
Filter approach Second stage quit overflow
Overheated Security Yes
Electrical Technique Electrical power Use a hundred W
Car Electrical power off Every single 30 minutes
Electricity Fuse 1. A  -φ5×20mm
Sound Amount <50dB(A)
Packaging Specifics Device Body Dimension 283x195x273mm
Import Carton Dimension 415x360x300 mm for 2 units
Net Weight for each Unit 3.8 kg
Import Gross Excess weight for every Carton eight.8 kg
Operating Problem Operating Temperature 41ºF to 104ºF (5ºC to 40ºC)
Operating Humidity ten% to 90% RH
Running Atmospheric Pressure seven-hundred-1060hpa
Storage Temperature -4ºF to 131ºF (-20ºC to 55ºC)
Storage Humidity 10 to 95% RH
Pump Driving System Max. Air Circulation 18L/min
Max. Vacuum Pressure .07Mpa
Perform Method Intermittent Run

Organization profile

AngelBiss Medical Engineering Co.,Ltd is a Chinese maker specializing in 5L Oxygen Concentrator and Portable Suction Equipment. 

AngelBiss is a technology holder provider from United States, create her very first production facility in ZheJiang , mainly interact in improvement, exportation and production high quality items on the discipline of Oxygen Remedy, Surgical treatment Remedy, Bronchial asthma Treatment and Diagnostic Therapy. AngelBiss has provided many good quality-pricing health care goods to planet clients. 

AngelBiss is the manufacturer can be sourced from conclude of final century.The vital systems are brought in United states of america and Germany. And now obtaining complete companies networks on Malaysia,China, Nepal, Bangladesh, Ukraine, Italy, Uk,and Iran. AngelBiss obtaining the most skilled talent engineering managements, knowledgeable personnel and income managements crew, which make her customers to believe AngelBiss can constantly be keeping the progressive crucial producing equipments and better off good quality handle program that will continuously creat much more values for her consumers. 

Manufacturing, item inspection and packaging

AngelBiss Medical Engineering Co.,Ltd implements rigorous good quality handle and product screening, and adheres to the principle of quality first.

High quality coverage: Constantly increase professionalism, Continually enhance the workflow, Make certain the basic safety and efficiency of the merchandise.

High quality aim: The move charge of uncooked supplies inspection exceeded ninety five%, Merchandise assembly qualification fee exceeds 98%, The manufacturing unit pass price is 100%.

Soon after product sales provider

We supply a one-yr guarantee to our world-wide distributors and clients. 

                                                         Choose AngelBiss, Now amount up faithfullness of our overall health

Speak to us
Ms. Elice
AneglBiss Healthcare Technologies Co.,Ltd.
Mob:
Net: szcarvindu                         

                                                                  
 

US $29-39
/ Piece
|
2 Pieces

(Min. Order)

###

Customized: Non-Customized
Certification: CE, ISO13485
Colour: White
Type of Body Fluid-Processing Device: Suction Machine
Transport Package: Gift Boxes and Pallets
Specification: According to Model

###

Customization:

###

System Map Functions AVERLAST 18
Pump Driving System Max. Air Flow 18L/min
Max. Vacuum Pressure 0.07Mpa
Work Mode Intermittent Run
Bottle System Max. Jar capacity 1400ml
Overflow Protection Double Safety Protection
Innovative Filter Waterproof Reusable
Inlet Cover One only, and no need outlet
Operate System Vacuum Gauge Range 0.00Mpa ~ 0.1Mpa
(0psi ~14psi)
Vacuum Control Range 0.02Mpa ~ 0.07Mpa
Suction Hose Hang Groove One, at the left
Wall mounted Hang Tip Two, at the back
Hidden Rotatable Handle Yes, at the top
3 Safety System Floating method First level stop overflow
Filter method Second level stop overflow
Overheated Protection Yes
Electrical System Power Consumption 100 W
Auto Power off Every 30 minutes
Power Fuse 1.0 A  -φ5×20mm
Noise Level <50dB(A)
Packaging Details Machine Body Size 283x195x273mm
Import Carton Size 415x360x300 mm for 2 units
Net Weight per Unit 3.8 kg
Import Gross Weight per Carton 8.8 kg
Operating Condition Operating Temperature 41ºF to 104ºF (5ºC to 40ºC)
Operating Humidity 10% to 90% RH
Operating Atmospheric Pressure 700-1060hpa
Storage Temperature -4ºF to 131ºF (-20ºC to 55ºC)
Storage Humidity 10 to 95% RH
Pump Driving System Max. Air Flow 18L/min
Max. Vacuum Pressure 0.07Mpa
Work Mode Intermittent Run
US $29-39
/ Piece
|
2 Pieces

(Min. Order)

###

Customized: Non-Customized
Certification: CE, ISO13485
Colour: White
Type of Body Fluid-Processing Device: Suction Machine
Transport Package: Gift Boxes and Pallets
Specification: According to Model

###

Customization:

###

System Map Functions AVERLAST 18
Pump Driving System Max. Air Flow 18L/min
Max. Vacuum Pressure 0.07Mpa
Work Mode Intermittent Run
Bottle System Max. Jar capacity 1400ml
Overflow Protection Double Safety Protection
Innovative Filter Waterproof Reusable
Inlet Cover One only, and no need outlet
Operate System Vacuum Gauge Range 0.00Mpa ~ 0.1Mpa
(0psi ~14psi)
Vacuum Control Range 0.02Mpa ~ 0.07Mpa
Suction Hose Hang Groove One, at the left
Wall mounted Hang Tip Two, at the back
Hidden Rotatable Handle Yes, at the top
3 Safety System Floating method First level stop overflow
Filter method Second level stop overflow
Overheated Protection Yes
Electrical System Power Consumption 100 W
Auto Power off Every 30 minutes
Power Fuse 1.0 A  -φ5×20mm
Noise Level <50dB(A)
Packaging Details Machine Body Size 283x195x273mm
Import Carton Size 415x360x300 mm for 2 units
Net Weight per Unit 3.8 kg
Import Gross Weight per Carton 8.8 kg
Operating Condition Operating Temperature 41ºF to 104ºF (5ºC to 40ºC)
Operating Humidity 10% to 90% RH
Operating Atmospheric Pressure 700-1060hpa
Storage Temperature -4ºF to 131ºF (-20ºC to 55ºC)
Storage Humidity 10 to 95% RH
Pump Driving System Max. Air Flow 18L/min
Max. Vacuum Pressure 0.07Mpa
Work Mode Intermittent Run

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the two wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The two pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to one end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use two or more wheels to transmit force. Compound pulleys have two or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across four steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the two wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope four times reduces the force required to lift one foot. Likewise, if the pulley system had four pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is three times the length of the rope, it will be more than three times the required length.

China Electric Portable Wound Drainage Vacuum Suction Pump     with Best Sales China Electric Portable Wound Drainage Vacuum Suction Pump     with Best Sales
editor by czh 2022-11-27